Summit Structural Panels

Artspan Inc. - Structural Panel Scheme Step One

SUPERIOR ENGINEERED BUILDING SOLUTIONS

Artspan’s Summit Structural Panels are self-framing, structural insulated steel panels that are manufactured by encompassing our proprietary polyisocyanurate foam with top and bottom pre-painted steel sheets. The strength of these steel sheets combined with the  characteristics of our foam allow the panel to serve as a structural component of the building envelope.

OUR PANEL FEATURES

Artspan - Weight of approximately 3.3 lbs./sq. ft. (based on 24ga top and bottom sheets)

Weight of approximately 3.3 lbs./sq. ft. (based on 24ga top and bottom sheets)

Artspan - 5'' polyisocyanurate foam core with density of approximately 2.5 lbs./cu. ft.

5'' polyisocyanurate foam core with density of approximately 2.5 lbs./cu. ft.

Artspan - Effective R-Value - 28.5

Effective R-Value - 28.5

Artspan - Flame spread Rating (tested in accordance with CAN/ULC S102-10) - 10

Flame spread Rating (tested in accordance with CAN/ULC S102-10) - 10

Artspan - Smoke Developed Classification (tested in accordance with CAN/ULC S102-10) - 215

Smoke Developed Classification (tested in accordance with CAN/ULC S102-10) - 215

Artspan - Pre painted top and bottom steel sheets

Pre painted top and bottom steel sheets

Artspan - Wide selection of colour options available

Wide selection of colour options available

Artspan - Patented one piece, continuous corner

Patented one piece, continuous corner

Artspan - Foam-to-foam bond panel joints

Foam-to-foam bond panel joints

Artspan - Pre finished on exterior and interior sides

Pre finished on exterior and interior sides

Artspan - High rib profile accommodates mechanical lines

High rib profile accommodates mechanical lines

Artspan - STC Rating (tested in accordance with ASTM E90 standard) - 26

STC Rating (tested in accordance with ASTM E90 standard) - 26

PANEL DIMENSIONS

AVAILABLE COLOURS

IMPORTANT COLOUR NOTES

  1. Colours may not appear exactly as shown above and may vary slightly.
  2. Please confirm prior to either Specifying, Estimating, or Ordering.
  3. Final colour selection should be made from a steel colour sample.
  4. Colour selection may be subject to availability.
  5. Custom colours available upon request.

STANDARD INTERIOR COLOURS

White White

Galvanized

STANDARD EXTERIOR COLOURS

White White

Tan

Stone Grey

Charcoal

PREMIUM EXTERIOR COLOURS

Mocha

Colonial Red

Regal Blue

Hartford Green

Espresso

Black

Frontier

INTERIOR FACE

  • 24 gauge deep corrugated pre-painted, galvanized, or galvalume steel Grade 33
  • Deep corrugation contributes to self-framing characteristics of panel system
  • Can be left unfinished or drywall and other interior finishings can be attached directly to the steel face
  • Deep corrugation provides chase for electrical and mechanical components

EXTERIOR FACE

  • 24 or 26 gauge, light corrugated pre-painted Grade 33 steel
  • Conforms to ASTM A792), Z275 or AZM150 finish
  • Embossed textured finish
  • Clean, maintenance free exterior finish
  • No exposed fasteners on panel joints
  • Wide variety of colours available

PRE-CUT, FLAT-PACKED PACKAGES

  • Summit Panels can be used to form the floor, wall & roof of your project.
  • Panels can come pre-cut to the required length and pitch
  • Packages can include the required fasteners, sealants and hardware required to assemble your building shell

Assembly drawings

  • Each panel is labelled and corresponds with a detailed assembly drawing.
  • Stamped engineered structural drawings can be provided
  • A detailed assembly guide is provided